|
SlabVoid interior utilizes a cellular configuration designed to uniformly support various loads imposed throughout
the concrete construction process.
|
|
|
|
The standard exterior cover is waxed for water resistance.
|
|
|
|
By utilizing papers of different capabilities and varying the frequency of the grid, SureVoid is able to offer designers
and users forms with numerous options in strength and moisture response.
|
|
|
This allows the performance of the product to be matched to specific use and project conditions.
|
|
|
Our 25+ years of experience allow us to offer the recommendations, instructions and insights required
for a successful installation.
|
|
|
|
Differences in climate, use or site conditions may affect the selection of void strength and moisture
response. Please contact the manufacturer for recommendations.
|
|
 Available Dimensions
HEIGHT - from approximately 2" to 24"
WIDTH - from approximately 4" to 48"
LENGTH - approximately 60"
|
Technical Data
Cover -
- 200-275# Test, B or C Flute Corrugated Paper
- Waxed/ Printed Exterior
- Scored Interior
Liner(s) (Optional) - Top or Bottom 150# Test, B or C Flute Corrugated Paper
Interior - 200-275# Test, B or C or DW Corrugated Paper
|
Recommendations
- Keep SlabVoid dry at all times prior to concrete placement.
- Prepare grade to a level, even, smooth surface.
- Install SureRound PierVoid® at piers where required.
- Install SlabVoid pieces around perimeter of slab area.
- Cover remaining area by placing pieces end to end and side by side.
- Cut across pieces with handsaw to fit into non-modular areas.
- Insert End Caps on open pieces that will be exposed to concrete.
- Place SureCover™ Board over entire surface to span small gaps (2" or less) and to protect against puncture from rebar chars, work boots, etc.
- Tape seams to prevent immediate water or concrete silt penetration.
- Install steel and place concrete
|
