 FormVoid™ (with panel flange) |
 |
Concrete form rests on bottom flange and holds void form in place |
* NOTES:
- WallVoid interior utilizes a cellular configuration to uniformly support various loads throughout the concrete construction process.
- Standard length is 5'-0" (nominal). Pieces are easily cut to fit as required.
- Available void depths range from 1 inch to 12 inches, and can be stacked to achieve greater depths.
- Standard widths range from 4 inches to 24 inches in one inch increments and can be used side by side to achieve greater widths.
- Custom made products are readily available. End Caps included with factory assembled WallVoid
- Unfavorable weather and/or site conditions may affect the selection of void strengths. Please contact the manufacturer for recommendations.
|
|
|
TrenchVoid™ |
 |
Designed without bottom flange for easy placement in trench |
* NOTES:
- WallVoid interior utilizes a cellular configuration to uniformly support various loads throughout the concrete construction process.
- Standard length is 5'-0" (nominal). Pieces are easily cut to fit as required.
- Available void depths range from 1 inch to 12 inches, and can be stacked to achieve greater depths.
- Standard widths range from 4 inches to 24 inches in one inch increments and can be used side by side to achieve greater widths.
- Custom made products are readily available. End Caps included with factory assembled WallVoid
- Unfavorable weather and/or site conditions may affect the selection of void strengths. Please contact the manufacturer for recommendations.
|
|
|
TrapVoid™ |
 |
For trenched or formed walls where concrete retainer at base of grade beam is required |
* NOTES:
- WallVoid interior utilizes a cellular configuration to uniformly support various loads throughout the concrete construction process.
- Standard length is 5'-0" (nominal). Pieces are easily cut to fit as required.
- Available void depths range from 1 inch to 12 inches, and can be stacked to achieve greater depths.
- Standard widths range from 4 inches to 24 inches in one inch increments and can be used side by side to achieve greater widths.
- Custom made products are readily available. End Caps included with factory assembled WallVoid
- Unfavorable weather and/or site conditions may affect the selection of void strengths. Please contact the manufacturer for recommendations.
|
|
 Related Products:
- ArcVoid™ - Used to correctly void the circular edge of a drilled pier.
- Seam Pads - Used to cover joints and prevent moisture absorption and concrete from seeping in between void forms.
- End Caps - Used at exposed ends of void forms to prevent moisture and concrete from flowing into material
- Commercial SureTops™ - Used to correctly shape the upper portion of cast-in-place concrete drilled piers.
|
|
